Artificial Heterointerfaces with Regulated Charge Distribution of Ni Active Sites for Urea Oxidation Reaction.

In contrast to the thermodynamically unfavorable anodic oxygen evolution reaction, the electrocatalytic urea oxidation reaction (UOR) presents a more favorable thermodynamic potential. However, the practical application of UOR has been hindered by sluggish kinetics. In this study, hierarchical porous nanosheet arrays featuring abundant Ni-WO3 heterointerfaces on nickel foam (Ni-WO3/NF) is introduced as a monolith electrode, demonstrating exceptional activity and stability toward UOR. The Ni-WO3/NF catalyst exhibits unprecedentedly rapid UOR kinetics (200 mA cm-2 at 1.384 V vs. RHE) and a high turnover frequency (0.456 s-1), surpassing most previously reported Ni-based catalysts, with negligible activity decay observed during a durability test lasting 150 h. Ex situ X-ray photoelectron spectroscopy and density functional theory calculations elucidate that the WO3 interface significantly modulates the local charge distribution of Ni species, facilitating the generation of Ni3+ with optimal affinity for interacting with urea molecules and CO2 intermediates at heterointerfaces during UOR. This mechanism accelerates the interfacial electrocatalytic kinetics. Additionally, in situ Fourier transform infrared spectroscopy provides deep insights into the substantial contribution of interfacial Ni-WO3 sites to UOR electrocatalysis, unraveling the underlying molecular-level mechanisms. Finally, the study explores the application of a direct urea fuel cell to inspire future practical implementations.

Molecular basis of hippopotamus ACE2 binding to SARS-CoV-2.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has a wide range of hosts, including hippopotami, which are semi-aquatic mammals and phylogenetically closely related to Cetacea. In this study, we characterized the binding properties of hippopotamus angiotensin-converting enzyme 2 (hiACE2) to the spike (S) protein receptor binding domains (RBDs) of the SARS-CoV-2 prototype (PT) and variants of concern (VOCs). Furthermore, the cryo-electron microscopy (cryo-EM) structure of the SARS-CoV-2 PT S protein complexed with hiACE2 was resolved. Structural and mutational analyses revealed that L30 and F83, which are specific to hiACE2, played a crucial role in the hiACE2/SARS-CoV-2 RBD interaction. In addition, comparative and structural analysis of ACE2 orthologs suggested that the cetaceans may have the potential to be infected by SARS-CoV-2. These results provide crucial molecular insights into the susceptibility of hippopotami to SARS-CoV-2 and suggest the potential risk of SARS-CoV-2 VOCs spillover and the necessity for surveillance. IMPORTANCE: The hippopotami are the first semi-aquatic artiodactyl mammals wherein SARS-CoV-2 infection has been reported. Exploration of the invasion mechanism of SARS-CoV-2 will provide important information for the surveillance of SARS-CoV-2 in hippopotami, as well as other semi-aquatic mammals and cetaceans. Here, we found that hippopotamus ACE2 (hiACE2) could efficiently bind to the RBDs of the SARS-CoV-2 prototype (PT) and variants of concern (VOCs) and facilitate the transduction of SARS-CoV-2 PT and VOCs pseudoviruses into hiACE2-expressing cells. The cryo-EM structure of the SARS-CoV-2 PT S protein complexed with hiACE2 elucidated a few critical residues in the RBD/hiACE2 interface, especially L30 and F83 of hiACE2 which are unique to hiACE2 and contributed to the decreased binding affinity to PT RBD compared to human ACE2. Our work provides insight into cross-species transmission and highlights the necessity for monitoring host jumps and spillover events on SARS-CoV-2 in semi-aquatic/aquatic mammals.

[Optimization of prediction model for personalized water pills based on semantic analysis of traditional Chinese medicine materials].

This study aims to optimize the prediction model of personalized water pills that has been established by our research group. Dioscoreae Rhizoma, Leonuri Herba, Codonopsis Radix, Armeniacae Semen Amarum, and calcined Oyster were selected as model medicines of powdery, fibrous, sugary, oily, and brittle materials, respectively. The model prescriptions were obtained by uniform mixing design. With hydroxypropyl methylcellulose E5(HPMC-E5) aqueous solution as the adhesive, personalized water pills were prepared by extrusion and spheronizaition. The evaluation indexes in the pill preparation process and the multi-model statistical analysis were employed to optimize and evaluate the prediction model of personalized water pills. The prediction equation of the adhesive concentration was obtained as follows: Y_1=-4.172+3.63X_A+15.057X_B+1.838X_C-0.997X_D(adhesive concentration of 10% when Y_1<0, and 20% when Y_1>0). The overall accuracy of the prediction model for adhesive concentration was 96.0%. The prediction equation of adhesive dosage was Y_2=6.051+94.944X_A~(1.5)+161.977X_B+70.078X_C~2+12.016X_D~(0.3)+27.493X_E~(0.3)-2.168X_F~(-1)(R~2=0.954, P<0.001). Furthermore, the semantic prediction model for material classification of traditional Chinese medicines was used to classify the materials contained in the prescription, and thus the prediction model of personalized water pills was evaluated. The results showed that the prescriptions for model evaluation can be prepared with one-time molding, and the forming quality was better than that established by the research group earlier. This study has achieved the optimization of the prediction model of personalized water pills.

[Composite excipients for preparing concentrated water pills of personalized traditional Chinese medicine prescriptions by extruding-rounding method].

This study aims to optimize the composite excipients suitable for the preparation of concentrated water pills of personalized traditional Chinese medicine prescriptions by the extruding-rounding method and investigate the roles of each excipient in the preparation process. The fiber materials and powder materials were taken as the standard materials suitable as excipients in the preparation of personalized concentrated water pills without excipient. Water absorption properties and torque rheology were used as indicators for selecting the materials of composite excipients. The ratio of composite excipients was optimized by D-optimal mixture design. Moreover, to demonstrate the universal applicability of the optimal composite excipients, this study selected three traditional Chinese medicine prescriptions with low, medium, and high extraction rates to verify the optimal ratio. Finally, the effects of each selected excipient on the molding of personalized concentrated water pills were investigated with the four parameters of the pill molding quality as indicators. The optimized composite excipients were dextrin∶microcrystalline cellulose(MCC)∶low-substituted hydroxypropyl cellulose(L-HPC) at a ratio of 1∶2∶4. The composite excipients were used for the preparation of personalized concentrated water pills with stable process, good quality, and a wide range of application. Dextrin acted as a diluent and accelerated the speed of extruding. MCC mainly served as an adhesive, increasing the cohesion and viscosity of the pills. L-HPC as a water absorbent and disintegrating agent can absorb and hold the water of the concentrate and has a strong disintegration effect.

[Research practice and development direction of intelligent manufacturing of presonalized traditional Chinese medicine preparations].

In recent years, as people's living standards continue to improve, and the pace of life accelerates dramatically, the demand and quality of traditional Chinese medicine(TCM) services from patients continue to rise. As an essential supplement to the existing forms of TCM application, such as Chinese patent medicine, decoction, and formulated granules, presonalized TCM preparations is facing an increasing market demand. Currently, manual and semi-mechanized production are the primary production ways in presonalized TCM preparations. However, the production process control level is low, and digitalization and informatization need to be improved, which restricts the automated and intelligent development of presonalized TCM preparations. Presonalized TCM preparations faces a significant opportunity and challenge in integrating with intelligent manufacturing through research and development of intelligent equipment and core technology. This paper overviews the connotation and characteristics of intelligent manufacturing and summarizes the application of intelligent manufacturing technologies such as "Internet of things" "big data", and "artificial intelligence" in the TCM industry. Based on the innovative research and development model of "intelligent classification of TCM materials, intelligent decision making of prescription and process, and online control and intelligent production" of presonalized TCM preparations, the research practice and achievements from our research group in the field of intelligent manufacturing of presonalized TCM preparations are introduced. Ultimately, the paper proposes the direction for developing intelligent manufacturing of presonalized TCM preparations, which will provide a reference for the research and application of automation and intelligence of presonalized TCM preparations.

[Molding law of traditional Chinese medicine gel plaster based on physicochemical properties of raw materials and intermediates].

This paper aims to study the correlation between the physicochemical properties of raw materials and intermediates and the molding quality and law of traditional Chinese medicine(TCM) gel plaster by using TCM slices and powder as raw materials. 48 TCM compounds are selected as model prescriptions to prepare gel plasters. The rotational rheometer is used to determine the rheological parameters of the plaster, including storage modulus(G'), loss modulus(G″), yield stress(τ), and creep compliance [J(t)]. The molding quality of the prepared TCM gel plaster is evaluated by subjective and objective measures. Clustering and principal component analysis are conducted to evaluate the physical properties of the plaster. By measuring the rheological properties of the plaster, the molding quality of the TCM gel plaster can be predicted, with an accuracy of 83.72% after seven days of modeling and 88.37% after 30 days of modeling. When the parameters such as G' and G″ of the plaster are large, and the [J(t)] is small, the molding quality of the plaster is better. When the plaster coating point is no less than 3, it is difficult to be coated. In addition, when the proportion of metal ions in the prescription is higher, the 30-day forming quality of the plaster is mainly affected, and the viscosity of the plaster is poor. If the prescription contains many acidic chemical components, the 7-day forming quality of the plaster is mainly affected, with many residuals. The results suggest that the rheological properties of the plaster can be used to predict the molding quality of TCM slice and powder gel plaster. It can provide a reference for the development of TCM gel plaster prescriptions.

[Intelligent material classification of traditional Chinese medicine based on semantic analysis].

A method for material classification of traditional Chinese medicines based on the physical properties of powder has been established by our research group. This method involves pre-treatment of traditional Chinese medicine decoction pieces, powder preparation, and determination of physical properties, being cumbersome. In this study, the word segmentation logic of semantic analysis was adopted to establish the thesaurus and local standardized semantic word segmentation database with the macroscopic and microscopic characteristics of 36 model traditional Chinese medicines as the basic data. The physical properties of these medicines have been determined and the classification of these medicines is clear in the cluster analysis. A total of 55 keywords for powdery, fibrous, sugary, oily, and brittle materials were screened by association rules and the set inclusion and exclusion criteria, and the weights of the keywords were calculated. Furthermore, the algorithms of the keyword matching scores and the computation rules of the single or multiple material classification were established for building the intelligent model of semantic analysis for the material classification. The semantic classification results of the other 35 TCMs except Pseudostellariae Radix(multi-material medicine) agreed with the clustering results based on the physical properties of the powder, with an agreement rate of 97.22%. In model validation, the prediction results of semantic classification of traditional Chinese medicines were consistent with the clustering results based on the physical properties of powder, with an agreement rate of 83.33%. The results showed that the method of material classification based on semantic analysis was feasible, which laid a foundation for the development of intelligent decision-making technology for personalized traditional Chinese medicine preparations.

[Molding matrix formulation of hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine preparations].

This study aims to optimize the matrix formulation for the hot-melt pressure-sensitive adhesive plaster of personalized traditional Chinese medicine(TCM) preparations and verify the applicability of the formulation. The central composite design in JMP Pro 16.1.0 was employed to optimize the dosages of styrene-isoprene-styrene triblock copolymer(SIS), hydrogenated petroleum resin, and lightweight liquid paraffin, with the fine powder of Yipifang as the model drug(drug loading of 10%) and the sensory score and objective evaluation as the comprehensive evaluation indicators. The quality evaluation system of hot-melt pressure-sensitive adhesive plaster of personalized TCM preparations was established. The applicability of the optimized matrix formulation of hot-melt pressure-sensitive adhesive plaster was verified with 16 TCM preparations for external application. Furthermore, the applicability of the matrix formulation was investigated with different drug loadings. The general molding matrix formulation was SIS∶hydrogenated petroleum resin∶lightweight liquid paraffin 3∶3∶5. The optimized matrix formulation showed good molding properties and high quality scores for 16 TCM preparations and were suitable for the plastering of finely powdered decoction pieces with a loading capacity of 10% to 30%. The results suggest that the optimized matrix formulation has good applicability and is suitable for TCM preparations. The findings lay a foundation for the application and promotion of the hot-melt pressure-sensitive adhesive plasters of personalized TCM preparations.

[Preparation process selection of presonalized traditional Chinese medicine concentrated watered pills containing heat-unstable components].

In the process of preparing presonalized concentrated watered pills, the decoction needs to be concentrated by heat and mixed with medicinal slices or powder to prepare a wet mass. However, some of the traditional Chinese medicine(TCM) components are easily decomposed or transformed by heat. In order to optimize the preparation process of presonalized TCM concentrated watered pills and reduce the loss of heat-unstable components in prescriptions, this study uses five compound TCM prescriptions containing heat-unstable components as model prescriptions, namely the Linggui Zhugan Formula, Xiaochengqi Formula, Sanpian Formula, Xiaoer Qixing Formula, and Xiaoyao Formula. Based on the two kinds of preparation process of presonalized concentrated watered pills previously established by our research group, whole extract concentrated watered pills and concentrated watered pills without excipients are prepared, respectively. Characteristic maps are measured and compared with those of the corresponding decoction. The results show that the characteristic maps of the concentrated watered pills without excipients of the five model prescriptions are very close to those of the decoction, and the number of characteristic peaks and peak areas are higher than those of whole extract concentrated watered pills. In addition, the peak area of some peaks is higher than that of the corresponding decoction. Thus, it is recommended to select the preparation process of prescription-based concentrated watered pills without excipients based on the "unification of medicines and excipients" to preserve those heat-unstable components more effectively when the prescription contains a heat-unstable component of TCM. This study provides a basis for the subsequent reasonable development and application of presonalized TCM pills.

A Case of a Eustachian Tube Hairy Polyp Misdiagnosed as an Adenoid Residual in a Child.

Hairy polyps, considered a highly unusual congenital anomaly of the pharynx, are believed by many scholars to arise from the ectoderm and mesoderm during the embryonic stage. These growths often have a pear or sausage shape, are pedunculated, and their size ranges between 0.5 and 6 cm. They are typically grayish white or pink in color. This article discusses a 12-year-old female who had a growth at the Eustachian tube's entrance on the left side of the nasopharyngeal wall, as identified by a computed tomography scan of the neck soft tissue; it was suspected to be a hairy polyp originating from the left Eustachian tube. The diagnosis of a hairy polyp was confirmed through pathology. The hairy polyp at the Eustachian tube, in this case, showed an irregular form with a wide base, making it look similar to an adenoid; thus, increasing the risk of it being misdiagnosed as residual adenoid tissue.

Lutetium-Induced Ultrafine PtRu Nanoclusters with a High Electrochemical Surface Area for Direct Methanol Fuel Cells at Alleviated Temperatures.

PtRu alloys have been recognized as the state-of-the-art catalysts for the methanol oxidation reaction (MOR) in direct methanol fuel cells (DMFCs). However, their applications in DMFCs are still less efficient in terms of both catalytic activity and durability. Rare earth (RE) metals have been recognized as attractive elements to tune the catalytic activity, while it is still a world-class challenge to synthesize well-dispersed Pt-RE alloys. Herein, we developed a novel hydrogen-assisted magnesiothermic reduction strategy to prepare a highly dispersed carbon-supported lutetium-doped PtRu catalyst with ultrafine nanoclusters and atomically dispersed Ru sites. The PtRuLu catalyst shows an outstanding high electrochemical surface area (ECSA) of 239.0 m2 gPt-1 and delivers an optimized MOR mass activity and specific activity of 632.5 mA mgPt-1 and 26 A cmPt-2 at 0.4 V vs saturated calomel electrode (SCE), which are 3.6 and 3.5 times of commercial PtRu-JM and an order higher than PtLu, respectively. These novel catalysts have been demonstrated in a high-temperature direct methanol fuel cell running in a temperature range of 180-240 °C, achieving a maximum power density of 314.3 mW cm-2. The AC-STEM imaging, in situ ATR-IR spectroscopy, and DFT calculations disclose that the high performance is resulted from the highly dispersed PtRuLu nanoclusters and the synergistic effect of the atomically dispersed Ru sites with PtRuLu nanoclusters, which significantly reduces the CO* intermediates coverage due to the promoted water activation to form the OH* to facilitate the CO* removal.

Application of propofol-remifentanil intravenous general anesthesia combined with regional block in pediatric ophthalmic surgery.

OBJECTIVE: The aim of this study is to observe the anesthetic effect and safety of intravenous anesthesia without muscle relaxant with propofol-remifentanil combined with regional block under laryngeal mask airway in pediatric ophthalmologic surgery. METHODS: A total of 90 undergoing ophthalmic surgery were anesthetized with general anesthesia using the laryngeal mask airway without muscle relaxant. They were randomly divided into two groups: 45 children who received propofol-remifentanil intravenous anesthesia combined with regional block (LG group), and 45 children who received total intravenous anesthesia (G group). The peri-operative circulatory indicators, awakening time after general anesthesia, postoperative analgesic effect and the incidence of anesthesia-related adverse events were respectively compared between the two groups. RESULTS: All the children successfully underwent the surgical procedure. The awakening time after general anesthesia and removal time of laryngeal mask were significantly shorter in the LG group than in the G group (P < 0.05). There was no statistically significant difference in the heart rates in the perioperative period between the two groups (P > 0.05). There was no statistically significant difference in the incidence of intraoperative physical response, respiratory depression, postoperative nausea and vomiting (PONV) and emergence agitation (EA) between the two groups (P > 0.05). The pain score at the postoperative hour 2 was lower in the LG group than in the G group (P < 0.05). CONCLUSION: Propofol-remifentanil intravenous anesthesia combined with long-acting local anesthetic regional block anesthesia, combined with laryngeal mask ventilation technology without muscle relaxants, can be safely used in pediatric eye surgery to achieve rapid and smooth recovery from general anesthesia and better postoperative analgesia. This anesthesia scheme can improve the comfort and safety of children in perioperative period, and has a certain clinical popularization value.

Epidemiological and clinical characteristics of death from hemorrhagic fever with renal syndrome: a meta-analysis.

Introduction: Hemorrhagic fever with renal syndrome (HFRS) is an acute infectious disease comprising five stages: fever, hypotension, oliguria, diuresis (polyuria), and convalescence. Increased vascular permeability, coagulopathy, and renal injury are typical clinical features of HFRS, which has a case fatality rate of 1-15%. Despite this, a comprehensive meta-analyses of the clinical characteristics of patients who died from HFRS is lacking. Methods: Eleven Chinese- and English-language research databases were searched, including the China National Knowledge Infrastructure Database, Wanfang Database, SinoMed, VIP Database, PubMed, Embase, Scopus, Cochrane Library, Web of Science, Proquest, and Ovid, up to October 5, 2023. The search focused on clinical features of patients who died from HFRS. The extracted data were analyzed using STATA 14.0. Results: A total of 37 articles on 140,295 patients with laboratory-confirmed HFRS were included. Categorizing patients into those who died and those who survived, it was found that patients who died were older and more likely to smoke, have hypertension, and have diabetes. Significant differences were also observed in the clinical manifestations of multiple organ dysfunction syndrome, shock, occurrence of overlapping disease courses, cerebral edema, cerebral hemorrhage, toxic encephalopathy, convulsions, arrhythmias, heart failure, dyspnea, acute respiratory distress syndrome, pulmonary infection, liver damage, gastrointestinal bleeding, acute kidney injury, and urine protein levels. Compared to patients who survived, those who died were more likely to demonstrate elevated leukocyte count; decreased platelet count; increased lactate dehydrogenase, alanine aminotransferase, and aspartate aminotransferase levels; prolonged activated partial thromboplastin time and prothrombin time; and low albumin and chloride levels and were more likely to use continuous renal therapy. Interestingly, patients who died received less dialysis and had shorter average length of hospital stay than those who survived. Conclusion: Older patients and those with histories of smoking, hypertension, diabetes, central nervous system damage, heart damage, liver damage, kidney damage, or multiorgan dysfunction were at a high risk of death. The results can be used to assess patients' clinical presentations and assist with prognostication.Systematic review registration:https://www.crd.york.ac.uk/prospero/, (CRD42023454553).

Progress of Mitochondrial Function Regulation in Cardiac Regeneration.

Heart failure and myocardial infarction, global health concerns, stem from limited cardiac regeneration post-injury. Myocardial infarction, typically caused by coronary artery blockage, leads to cardiac muscle cell damage, progressing to heart failure. Addressing the adult heart's minimal self-repair capability is crucial, highlighting cardiac regeneration research's importance. Studies reveal a metabolic shift from anaerobic glycolysis to oxidative phosphorylation in neonates as a key factor in impaired cardiac regeneration, with mitochondria being central. The heart's high energy demands rely on a robust mitochondrial network, essential for cellular energy, cardiac health, and regenerative capacity. Mitochondria's influence extends to redox balance regulation, signaling molecule interactions, and apoptosis. Changes in mitochondrial morphology and quantity also impact cardiac cell regeneration. This article reviews mitochondria's multifaceted role in cardiac regeneration, particularly in myocardial infarction and heart failure models. Understanding mitochondrial function in cardiac regeneration aims to enhance myocardial infarction and heart failure treatment methods and insights.

Genomic insights into the clonal reproductive Opuntia cochenillifera: mitochondrial and chloroplast genomes of the cochineal cactus for enhanced understanding of structural dynamics and evolutionary implications.

Background: The cochineal cactus (Opuntia cochenillifera), notable for its substantial agricultural and industrial applications, predominantly undergoes clonal reproduction, which presents significant challenges in breeding and germplasm innovation. Recent developments in mitochondrial genome engineering offer promising avenues for introducing heritable mutations, potentially facilitating selective sexual reproduction through the creation of cytoplasmic male sterile genotypes. However, the lack of comprehensive mitochondrial genome information for Opuntia species hinders these efforts. Here, we intended to sequence and characterize its mitochondrial genome to maximize the potential of its genomes for evolutionary studies, molecular breeding, and molecular marker developments. Results: We sequenced the total DNA of the O. cochenillifera using DNBSEQ and Nanopore platforms. The mitochondrial genome was then assembled using a hybrid assembly strategy using Unicycler software. We found that the mitochondrial genome of O. cochenillifera has a length of 1,156,235 bp, a GC content of 43.06%, and contains 54 unique protein-coding genes and 346 simple repeats. Comparative genomic analysis revealed 48 homologous fragments shared between mitochondrial and chloroplast genomes, with a total length of 47,935 bp. Additionally, the comparison of mitochondrial genomes from four Cactaceae species highlighted their dynamic nature and frequent mitogenomic reorganizations. Conclusion: Our study provides a new perspective on the evolution of the organelle genome and its potential application in genetic breeding. These findings offer valuable insights into the mitochondrial genetics of Cactaceae, potentially facilitating future research and breeding programs aimed at enhancing the genetic diversity and adaptability of O. cochenillifera by leveraging its unique mitochondrial genome characteristics.

Application of natural products in regulating ferroptosis in human diseases.

BACKGROUND: Ferroptosis is a type of cell death caused by excessive iron-induced peroxidation. It has been found to be involved in a variety of diseases, and natural products can be used to target ferroptosis in treatments. Natural products are biologically active compounds extracted or synthesized from nature. It is an important resource for the discovery of skeletons with a high degree of structural diversity and a wide range of bioactivities, which can be developed directly or used as a starting point for the optimization of new drugs. PURPOSE: In this review, we aim to discuss the interactions between natural products and ferroptosis in the treatment of human diseases. METHODS: Literature was searched in Pubmed, Science Direct, and Web of Science databases for the 11-year period from 2012 to 2023 using the search terms "natural products", "ferroptosis", "human disease", "neurodegenerative disease", "cardiovascular disease", and "cancer". RESULTS: In this research, the roles of natural products and ferroptosis were investigated. We suggest that natural products, such as terpenoids, flavonoids, polyphenols, alkaloids, and saponins, can be used in therapeutic applications for human diseases, as well as in ferroptosis. Additionally, the main mechanisms of ferroptosis were summarized and discussed. Furthermore, we propose that natural products can be utilized to enhance the sensitivity of cancer cells to ferroptosis, thus helping to overcome drug resistance and inhibit metastasis. Moreover, natural products have the potential to modulate the expression levels of ferroptosis-related factors. Finally, the future directions of this field were highlighted. CONCLUSION: The potential of natural products which focus on ferroptosis to treat human illnesses, particularly cancer, is very encouraging for human wellbeing.

Isolation, identification, and proteomic analysis of outer membrane vesicles of Riemerella anatipestifer SX-1.

Riemerella anatipestifer, belonging to Weeksellaceae family Riemerella, is a bacterium that can infect ducks, geese, and turkeys, causing diseases known as duck infectious serositis, new duck disease, and duck septicemia. We collected diseased materials from ducks on a duck farm in China and then isolated and purified a strain of serotype 1 R. anatipestifer named SX-1. Animal experiments showed that SX-1 is a highly virulent strain with an LD50 value of 101 CFU/mL. The complete genome sequence was obtained. The complete genome sequence of R. anatipestifer SX-1 was 2,112,539 bp; 847 genes were involved in catalytic activity, and 445 genes were related to the cell membrane. The total length of the repetitive sequences was 8746 bp. Four CRISPR loci were predicted in R. anatipestifer strain SX-1, and 4 genomic islands were predicted. Concentration and ultra-high-speed centrifugation were used to extract the outer membrane vesicles of R. anatipestifer SX-1. The OMVs were extracted successfully. Particle size analysis revealed the size and abundance of particles: 147.4 nm, 94.9%; 293.6 nm, 1.1%; 327.2 nm, 1.1%; 397.2 nm, 0.3%; and 371.8 nm, 1.1%. The average size was 173.5 nm. Label-free proteomic technology was used to identify proteins in the outer membrane vesicles. ATCC 11845 served as the reference genome sequence, and 148 proteins were identified using proteomic analysis, which were classified into 5 categories based on their sources. Among them, 24 originated from cytoplasmic proteins, 4 from extracellular secreted proteins, 27 from outer membrane proteins, 10 from periplasmic proteins, and 83 from unknown sources. This study conducted a proteomic analysis of OMVs to provide a theoretical basis for the development of R. anatipestifer OMVs vaccines and adjuvants and lays the foundation for further research on the relationship between the pathogenicity of R. anatipestifer and OMVs.

Iron overload in hypothalamic AgRP neurons contributes to obesity and related metabolic disorders.

Iron overload is closely associated with metabolic dysfunction. However, the role of iron in the hypothalamus remains unclear. Here, we find that hypothalamic iron levels are increased, particularly in agouti-related peptide (AgRP)-expressing neurons in high-fat-diet-fed mice. Using pharmacological or genetic approaches, we reduce iron overload in AgRP neurons by central deferoxamine administration or transferrin receptor 1 (Tfrc) deletion, ameliorating diet-induced obesity and related metabolic dysfunction. Conversely, Tfrc-mediated iron overload in AgRP neurons leads to overeating and adiposity. Mechanistically, the reduction of iron overload in AgRP neurons inhibits AgRP neuron activity; improves insulin and leptin sensitivity; and inhibits iron-induced oxidative stress, endoplasmic reticulum stress, nuclear factor κB signaling, and suppression of cytokine signaling 3 expression. These results highlight the critical role of hypothalamic iron in obesity development and suggest targets for treating obesity and related metabolic disorders.

Deep metagenomic characterization of the gut virome in pregnant women with preeclampsia.

Preeclampsia (PE), a pregnancy-specific syndrome, has been associated with the gut bacteriome. Here, to investigate the impact of the gut virome on the development of PE, we identified over 8,000 nonredundant viruses from the fecal metagenomes of 40 early-onset PE and 37 healthy pregnant women and profiled their abundances. Comparison and correlation analysis showed that PE-enriched viruses frequently connected to Blautia species enriched in PE. By contrast, bacteria linked to PE-depleted viruses were often the Bacteroidaceae members such as Bacteroides spp., Phocaeicola spp., Parabacteroides spp., and Alistipes shahii. In terms of viral function, PE-depleted viruses had auxiliary metabolic genes that participated in the metabolism of simple and complex polysaccharides, sulfur metabolism, lipopolysaccharide biosynthesis, and peptidoglycan biosynthesis, while PE-enriched viruses had a gene encoding cyclic pyranopterin monophosphate synthase, which seemed to be special, that participates in the biosynthesis of the molybdenum cofactor. Furthermore, the classification model based on gut viral signatures was developed to discriminate PE patients from healthy controls and showed an area under the receiver operating characteristic curve of 0.922 that was better than that of the bacterium-based model. This study opens up new avenues for further research, providing valuable insights into the PE gut virome and offering potential directions for future mechanistic and therapeutic investigations, with the ultimate goal of improving the diagnosis and management of PE.IMPORTANCEThe importance of this study lies in its exploration of the previously overlooked but potentially critical role of the gut virome in preeclampsia (PE). While the association between PE and the gut bacteriome has been recognized, this research takes a pioneering step into understanding how the gut virome, represented by over 8,000 nonredundant viruses, contributes to this condition. The findings reveal intriguing connections between PE-enriched viruses and specific gut bacteria, such as the prevalence of Blautia species in individuals with PE, contrasting with bacteria linked to PE-depleted viruses, including members of the Bacteroidaceae family. These viral interactions and associations provide a deeper understanding of the complex dynamics at play in PE.

B cells in pulmonary arterial hypertension: friend, foe or bystander?

There is an unmet need for new therapeutic strategies that target alternative pathways to improve the prognosis of patients with pulmonary arterial hypertension (PAH). As immunity has been involved in the development and progression of vascular lesions in PAH, we review the potential contribution of B cells in its pathogenesis and evaluate the relevance of B cell-targeted therapies. Circulating B cell homeostasis is altered in PAH patients, with total B-cell lymphopenia, abnormal subset distribution (expansion of naïve and antibody-secreting cells, reduction of memory B cells) and chronic activation. B cells are recruited to the lungs through local chemokine secretion, and activated by several mechanisms: 1) interaction with lung vascular auto-antigens through cognate B cell receptors; 2) co-stimulatory signals provided by T follicular helper (Tfh) cells (IL-21), T helper 2 (Th2) cells and mast cells (IL-4, IL-6 and IL-13); and 3) increased survival signals provided by B cell activating factor (BAFF) pathways. This activity results in the formation of germinal centres within perivascular tertiary lymphoid organs and in the local production of pathogenic autoantibodies that target the pulmonary vasculature and vascular stabilization factors (including angiotensin-II/endothelin-1 receptors and bone morphogenetic protein receptors). B cells also mediate their effects through enhanced production of pro-inflammatory cytokines, reduced anti-inflammatory properties by regulatory B cells, IgG-induced complement activation, and IgE-induced mast cell activation. Precision-medicine approaches targeting B cell immunity are a promising direction for select PAH conditions, as suggested by the efficacy of anti-CD20 therapy in experimental models and a trial of rituximab in systemic sclerosis-associated PAH.